Toshiba 4560 Operator'S Manual Download Page 124

Page: 124 / 180

122

Adding Paper to the Large-Capacity Feeder MP-1501 (Optional)

2. ADD PAPER

SYMBOL (Cont.)

11111

Open the cover of the large-capacity
feeder.

Holding the whole ream of paper, place it
in the large capacity feeder.

●

Make sure that all the sheets are placed
neatly aligned on the elevator tray.

●

Up to 1500 sheets of A4-size paper can
be placed. Do not add paper above the
limit line on the right.

●

Do not use creased, folded, wrinkled or
damp sheets of paper.

Note:

If you want to add paper because the

paper supply has become low, press the
TRAY DOWN

key before opening the

cover. The elevator tray will automatically
move down and stop.

22222

Close the cover of the large-capacity
feeder.

●

The elevator tray will automatically move
up to the paper feeding position.

Note:

Do not place anything under the

elevator tray.

33333

TRAY DOWN key

Summary of Contents for 4560





















































































































































































Search results

Summary of Contents for 4560

Reviews:

Related manuals for 4560

Brands by name

Popular brands

Toshiba 4560, Operator'S Manual

Search results

Summary of Contents for 4560

Reviews:

Related manuals for 4560

Brands by name

Popular brands