Toshiba 4560, Operator'S Manual

Page: 62 / 180

60
Select the desired copy size,
reproduction ratio, exposure, copy
quantity, etc. as required.
●
Normally, the automatic paper selection
(APS) mode is selected.
●
A maximum of 50 copies can be set.
44444
55555
Press the PRINT key.
●
Duplexed copies will exit.
Note: If the originals are odd-numbered, the
first copy will exit with one side blank and the
subsequent copies will be 2-sided.
5. DUPLEXED COPIES FROM SINGLE-SIDED ORIGINALS (Cont.)
Press the DUPLEX key on the BASIC
panel. Select the 1
2 mode (SINGLE-TO-
DUPLEX).
●
This message will appear (see the middle
figure):
EVEN or ODD number
of originals?
Note: If the STACK symbol is flashing,
remove the paper remaining in the automatic
duplexer. If the messages
To remove paper from
duplexer: Press INFO
and
Remove paper from
duplexer
appear, press INFO and the sheets of paper
will automatically exit.
22222
33333
Press the Original Count, EVEN or ODD
key in response to the message.
●
If you press the Original Count key, this
message appears:
WAIT
Counting originals
The document feeder will feed in and
count the originals. When it finishes
counting, the following message will
appear:
Return originals on
doc. feeder input tray
Then reset the originals in the original
feed tray in the same way as described in
step 1.