Toshiba 4560, Operator'S Manual

Page: 111 / 180

109
USING
THE
OPTIONAL SORTERS
USING THE OPTIONAL SORTERS
22222
Place the original(s).
Placing the originals on the original feed
tray:
●
Place them with facing up and align the
side guides to the originals.
●
The maximum number of originals (64~80
g/m
2
) that can be set at a time is as
follows:
Placing the original on the glass:
●
Place the original face down on the glass.
●
If you start with the last page of your
originals, the copies will be arranged in
the same page order as the originals.
●
The copies can be stapled in the position
corresponding to the upper right corner of
the original.
In this case, however, copies are not
stapled automatically (
see page 111
for manual stapling.)
●
Stapling will be done in the position
corresponding to the upper left corner of
the originals. However, in the 2 in 1
mode,stapling will be done in the position
corresponding to the lower right corner.
●
For the multistapling function of the MG-
2015, see the table on page 112.
●
To set larger originals (A3, B4 or Folio
size), pull out the extension holder.
33333
Key in the number of copies (sets).
●
Up to 20 sets can be keyed in (all sizes).
●
If more than the maximum number of sets
are entered, this message will appear.
Sorter limit:
20 copies
Key in a smaller number.
A5-R A4/B5 A4-R/B5-R A3/B4
MG-2009 — 50 50 25
MG-2010 — 50 25 25
MG-2012 50 50 50 25
MG-2015 50 50 50 25