34
For DTV
This feature can be used to check the version of
software currently installed. When in DTV mode,
it includes additional diagnostic information such
as signal strength, signal quality, centre frequency,
modulation, etc
1
From the
SETUP
menu, press
or
to select
System Information
.
2
Press
OK
to display the Boot Code Version and
APP SW Version.
System Information
WEAK
CH22
GOOD
GOOD
GOOD
STRONG
AVERAGE
TOSHIBA 2015
Model Name : L55 ID: XX
Boot Code Version: XXXX.XXXX.XXXX
APP SW Version: X.X.X.X.X (XXXXXX)
CH25
CH16
CH11
GOOD
3
For information about the signal quality of a
particular multiplex, press
or
to select that
multiplex.
4
Press
OK
for a screen showing detailed technical
information about the selected multiplex.
Over-the-air Upgrade
The Over-the-air Upgrade function is used when
a Software Upgrade is required for the TV in the
future.
NOTE:
•
This function may not work depending on the
country selected for
Country
.
•
The Over-the-air Upgrade may not function
correctly depending on the local area broadcasting
conditions, and the signal receiving environment.
Auto Upgrade
When
Auto Upgrade
is
On
, the television
automatically searches for upgrade information.
When new upgrade information is found, a
confi rmation screen is displayed.
•
Automatic searching is not performed when the
television is in standby.
1
From the
SETUP
menu, press
or
to select
DTV Settings
and press
OK
.
2
Press
or
to select
Over-the-air Upgrade
menu and press
OK
.
3
Press
or
to select
Auto Upgrade
.
4
Press
or
to select
On
or
Off
.
Searching for New Software
If preferred, software upgrades can be searched for
manually using Search for New Software.
1
From the
SETUP
menu, press
or
to select
DTV Settings
and press
OK
.
2
Press
or
to select
Over-the-air Upgrade
menu and press
OK
.
3
Press
or
to select
Auto Upgrade
and press
or
to select
On
.
4
Press
or
to select
Search for New
Software
.
5
Press
OK
. The television will automatically start
searching for a software upgrade, the progress
bar will move along the line.
If an upgrade is found, a message will be
displayed on the television. Follow the
instructions in the message. If no upgrades
are found, a screen will appear stating that no
upgrades are available.
Resetting the TV
Reset TV will reset all TV settings, including stored
channels, to their original factory values.
1
From the
SETUP
menu, press
or
to select
Reset TV
.
SETUP
Singapore
Home
Country
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
Quick Setup
Location
System Information
DTV Settings
Reset TV
2
Press
OK
to select.
A screen will appear warning that all settings
will be lost. Select
Yes
, and then press
OK
to
continue.
Using the TV’s features
405055L5550Series̲EEEV̲En.indd 34
405055L5550Series̲EEEV̲En.indd 34
27/05/18 13:14:59
27/05/18 13:14:59