Toshiba 39L4300 Series, Owner'S Manual, Page: 21 / 60

21
Using the TV’s features
Selecting the Dual 1 or Dual 2 mode
You can hear only Dual 1 or Dual 2 sound selected,
whenever bilingual programmes are received.
1
From the SOUND menu, press

or

to select
Dual .
2
Press

or

to select Dual 1 or Dual 2 .
NOTE:
• When the MTS setting is in Mono mode, the Dual
menu is not selectable.
• The Dual menu setting status remains even if the TV
is turned off .
Selecting the stereo programmes
1
When a stereo programme is received,
d
Stereo appears.
4
ABCD
Stereo
2
Press
s
to select the stereo/monaural mode.
d
Stereo and
e
Mono appear cyclically on
the screen.
Selecting the bilingual programmes
1
When a bilingual programme is received,
j
Dual appears.
2
Press
s
to select the sound to be heard. The
sound diff ers according to the transmission
system: NICAM or German stereo/bilingual
broadcast.
Display
Sound to be heard
NICAM
German stereo/
bilingual broadcast
j
Dual 1
Sub I sound Main sound
J
Dual 2
Sub II sound Sub sound
e
Mono
Main sound —
NOTE:
These settings are not stored in the TV memory.
Selecting the monaural programmes
If sound distortion, interruptions or silence arises in
the low sound volume level, setting the
e
Mono 2
mode will mitigate the problem.
1
When a monaural programme is received,
e
Mono appears.
Resetting the Base Colour Adjustment
The reset function adjusts the base colour
adjustment to the factory settings.
1
From the Base Colour Adjustment menu, press

or

to select Reset .
2
Press OK .
3
A confi rmation message will appear. Press

or

to select Yes , and then press OK .
Using the Active Backlight Control
In order to improve screen visibility, the Active
Backlight Control sets the screen brightness
automatically during dark scenes.
1
From the PICTURE menu, press

or

to
select Active Backlight Control .
2
Press

or

to select On or Off .
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize stereo/
bilingual programmes depending on the broadcast
signal.
1
Press MENU , and then press

or

to display
the SOUND menu.
SOUND
MTS
Dual
Balance
Advanced Sound Settings
Auto
Dual 1
Off
On
Stand
Audio Distortion Control
TV Mounting
Dynamic Range Control
Audio Level Offset
0
0
2
Press

or

to select MTS , and then press

or

to select Auto or Mono .
Mono mode
If you experience noise or poor reception of any
stereo/bilingual programme, set the
MTS mode to
Mono .
Noise will be reduced and reception may improve.
NOTE:
If you experience noise with a particular programme
on whose channel reception is usually good, try setting
MTS mode to
Auto , then press
s
to switch to
e
Mono (monaural).
3950L4300Series̲En.indd 21 3950L4300Series̲En.indd 21 2013/10/09 15:23:57 2013/10/09 15:23:57