Toshiba 39L4300 Series, Owner'S Manual, Page: 20 / 60

20
Using the TV’s features
Adjusting the Colour Temperature
Colour Temperature increases the warmth or
coolness of the picture by setting the red, green or
blue tint.
1
From the Picture Settings menu, press

or

to select Colour Temperature , then press OK .
2
Press

or

to select Cool , Natural , or Warm
to suit your preference.
Cool
Colour Temperature
Colour Temperature
Red Level
Green Level
Blue Level
Reset
0
0
0
3
Press

or

to select Red Level , Green Level
or Blue Level , then press

or

to adjust the
setting as required.
Resetting the Colour Temperature
This function resets your colour temparature
settings to the factory settings.
1
From the Colour Temperature menu, press

or

to select Reset , then press OK .
2
A confi rmation message will appear. Press

or

to select Yes , and then press OK .
Activating the Noise Reduction (NR)
If the receiving signal of MPEG is a mosquito
(grained) noise depending on the compression and
conversion, the picture is weak and the picture is
blurry, the picture may be improved when using this
function.
1
From the Picture Settings menu, press

or

to select Noise Reduction , and then press OK .
On
Auto
Auto
Noise Reduction
Auto Clean
MPEG NR
DNR
2
Select Auto Clean , and then press

or

to
select On or Off .
Off mode :
MPEG NR
menu and DNR menu are available.
• MPEG NR mode: Low , Middle , High or Off
• DNR (Digital Noise Reduction) mode: Low ,
Middle , High or Off
Resetting the Picture Settings
This feature resets the Picture Settings to the
factory settings.
NOTE:
If no picture settings have been changed, Reset is not
available.
1
From the Picture Settings menu, press

or

to select Reset , and then press OK .
2
A confi rmation message will appear. Press

or

to select Yes , and then press OK .
Adjusting the Colour Management
You can adjust the picture colour quality by
selecting from 6 base colour adjustments :
Red ,
Green , Blue , Yellow , Magenta or Cyan .
1
From the PICTURE menu, press

or

to
select 3D Colour Management .
2
Press

or

to select On .
3D Colour Management On
3
Press

or

to select Base Colour
Adjustment .
4
Press OK , then press

or

to select an item
you want to adjust.
Base Colour Adjustment
Hue Saturation Brightness
Red 0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
Green
Blue
Yellow
Magenta
Cyan
Reset
5
Press

, then press

or

to select Hue ,
Saturation or Brightness .
6
Press

or

to adjust the settings as required.
Hue Saturation Brightness
Red 0 0 0
NOTE:
If you select 3D Colour Management Off mode, this
mode is not available.
3950L4300Series̲En.indd 20 3950L4300Series̲En.indd 20 2013/10/09 15:23:57 2013/10/09 15:23:57