50
Disc Setup menu
Display
Choose whether to show a status display whenever a
button is pressed.
Picture Mode
The source content of a DVD can either be recorded in:
film format
(images are recorded at 24 frames per
second) or
video format
(images are recorded at
30 frames per second).
Note:
If picture appears cut off or doubled, select the
“Video” setting.
J
PEG Interval
Select the interval time between images during a JPEG
slide show.
Night Mode
Select to toggle the Night Mode feature on or off.
When enabled, this function allows for automatic
volume level adjustment for audio that may be too
low (e.g. whispered dialogues) or too high (e.g. a
thunderstorm scene).
Note:
The Night Mode feature is only applicable to
Dolby Digital-featured DVDs. The adjusted sound level
depends on the DVD encoding.
Digital Out
Select the sound format of the digital output depending
on the enabled signal connection.
Note:
MPEG audio will always be in PCM format
regardless of the Digital Output setting.
Off
There will be no on-screen display when any
button is pressed.
On
There will be an on-screen display when any
button is pressed (default).
Auto
The DVD player automatically detects the type
of source content and converts that signal in
an appropriate method based on the TV’s
current aspect ratio. This option will normally
suit most DVDs.
Film
Suitable for playback of DVDs recorded in a
film format.
Video
Suitable for playback of DVDs recorded in a
video format.
Off
Slide show option is disabled.
5, 10, or 15
seconds
Images will be displayed in a slide show.
The selected interval time between
images will be applied.
Parental :
Off
Set Password
Output :
Interlace
DivX(R) VOD
DRC :
Off
QSound :
On
Menu :
English
Subtitle :
English
Audio :
English
Display
:On
Picture Mode :Auto
JPEG Interval :Off
Off
Audio retained its disc recording volume level.
On
Volume level is automatically adjusted
depending on the scene content.
Off
Disable digital sound output. Select this
option when there is no equipment
connected to the Optical Digital Audio Out
jack.
PCM
Change Dolby Digital output to PCM.
Select this option when using a
two-channel digital stereo amplifier.
Bitstream
Select this option to output the signal in its
native format.
Parental :
Off
Set Password
Output :
Interlace
DivX(R) VOD
Menu :
English
Subtitle :
English
Audio :
English
E.B.L. :
Off
TV Screen
: 4:3
Display :
On
Picture Mode
: Auto
JPEG Interval : 5 Seconds
Screen Saver
: On
Night Mode
:Off
Digital Out
:Bitstream
