32
Basic playback
Basic playback (DVD / VCD / Audio CD)
1
Press
on the unit or on the remote control to turn on the unit.
The power indicator on the front of the unit changes to green.
2
Press
TV/DVD
on the remote control to
switch to DVD mode.
The DVD start-up screen will appear on
the screen.
3
Load a disc in the disc slot.
Important:
Remember to load the disc
with the label side (if present) facing
forward. Hold the disc by the edge (DO
NOT touch the disc surface) and align it
with the guides to slide it into the slot.
4
The prompt “
Insert Disc
” changes to “
Reading
” and then playback starts.
If the disc has its own menu, it will be displayed on-screen. Press
/
to
navigate the disc menu, then press
ENTER
to implement the selected menu
option.
Playback controls
• To adjust playback volume, press
VOL + / –.
• To temporarily suspend disc playback (still mode), press
PAUSE
.
• To continue playback from still mode, press
PLAY
.
• To stop playback, press
STOP
.
The unit supports playback resume function. If you stopped the disc playback
before it is completed, the unit records the stop point.
appears on-screen. Press
PLAY
to resume playback on the previous stop point. If you press
STOP
twice
in quick succession or unload the disc, the unit will clear the stop point.
• To remove the disc, press
EJECT
. Wait for the disc to be ejected and then
remove the disc from the slot.
Notes:
• In some instances the unit may take a minute or so to start disc playback.
• Do not move the unit during playback. Doing so may damage the disc.
• The playback resume function may not work on some discs.
• High resolution pictures on some discs may occasionally cause “noise” on the
picture display. If this is the case, reduce the Sharpness setting under the
Picture
Setting menu. Go to page 29 for more information.
• If the unit does not operate properly, static electricity build-up may be the cause.
Turn off the unit, then disconnect the power cord from the AC outlet. Reconnect the
power cord, then press
on the unit or on the remote control to turn on the unit
again.
Note:
If you are using
an audio amplifier, turn
it on, then select the
correct input source
based on the kind of
cable you used to
connect the amplifier to
the TV.
Caution:
Keep your
fingers well clear of the
disc slot when loading
or unloading a disc.
Neglecting to do so may
cause serious personal
injury.
Reading
/
/
