Electric Mower Deck Lift Replacement
Electric Mower Deck Lift Removal
1. Park the machine on a level surface and disengage the PTO. Stop the
engine, wait for all moving parts to stop and remove the key. Engage the
parking brake.
2. Remove the height-of-cut pin. Lower the deck until it’s on the floor and there
is slack in the chains.
3. Remove the ½ lock nut and bolt securing the deck lift to the deck lift actuator.
Note:
May need to raise deck lift actuator slightly for removal. Deck lift
actuator will swing downwards after fastener removal.
g348232
Figure 63
4. Disconnect the harness plug from the deck lift to the wiring harness.
g348235
Figure 64
5. Remove the pin clip securing the rear of the deck lift actuator to the deck
lift asm. Remove the deck lift asm.
Electric Mower Deck Lift Installation
1. Install the deck lift asm. Install the pin clip securing the rear of the deck lift
actuator to the deck lift asm.
4000 Series Z MASTER® Service Manual
Page 6–9
Deck: Service and Repairs
3442-427 Rev A
Summary of Contents for Z Master 4000 Series
