Service Procedure Icons
The following icons appear throughout this Service Manual to bring attention to
specific important details of a service procedure.
Critical Process
This icon is used to highlight:
•
Installing safety equipment (shields, guards, seat belts, brakes, and R.O.P.S.
components) that may have been removed
•
Dimensions or settings that must be maintained for proper machine operation
•
A specific fastener tightening sequence
•
Component orientation that may not be obvious
Critical Torque
This icon is used to highlight an assembly torque requirement that is different
than what is recommended in the Standard Torque Tables.
Fluid Specifications
This icon is used to highlight fluid specifications and capacities that are less
common, and may not appear on the machine service decal or in the machine
Operator’s Manual.
Note:
Refer to the service decal on the machine and the machine
Operator’s
Manual
for commonly used fluid specifications and capacities.
Preface
Page 4
4000 Series Z MASTER® Service Manual
3442-427 Rev A
Summary of Contents for Z Master 4000 Series
