Throttle Cable Assembly Unit Installation (continued)
g346220
Figure 31
5. Connect the battery by installing the positive cable first, then the negative
cable to the battery.
Choke Cable Assembly Replacement
Choke Cable Assembly Unit Removal
1. Park the machine on a level surface and disengage the PTO. Stop the
engine, wait for all moving parts to stop and remove the key. Engage the
parking brake.
2. Disconnect the battery by removing the negative cable first, then the positive
cable from the battery.
3. Remove the 4 (1/4-20 inch) torx screws securing the RH side pod to the RH
console. Remove the RH side pod from the RH console.
g346220
Figure 32
4. Remove the nut from the bottom side of the choke cable securing the cable
to the pod.
5. Disconnect the choke cable.
Chassis: Service and Repairs
Page 5–16
4000 Series Z MASTER® Service Manual
3442-427 Rev A
Summary of Contents for Z Master 4000 Series
