Changing the Hydraulic Fluid and Cleaning
the Strainer..................................................... 53
Replacing the Hydraulic Filter ............................. 54
Changing the High Flow Hydraulic Oil and
Filter (TC Models only)................................... 54
Raising the Box in an Emergency ........................ 55
Storage ....................................................................... 57
Schematics ................................................................. 58
Safety
The machine meets the requirements of SAE J2258.
Supervisors, operators and service persons should be
familiar with the following standards and publications:
(The material may be obtained from the address shown).
•
Flammable and Combustible Liquids Code:
ANSI/NFPA 30
•
National Fire Protection Association:
ANSI/NFPA #505; Powered Industrial Trucks
ADDRESS:
National Fire Prevention Association
Barrymarch Park
Quincy, Massachusetts 02269 U.S.A
•
ANSI/ASME B56.8 Personal Burden Carriers
ADDRESS:
American National Standards Institute, Inc.
1430 Broadway
New York, New York 10018 U.S.A.
•
ANSI/UL 558; Internal Combustion Engine
Powered Industrial Trucks
ADDRESS:
American National Standards Institute, Inc.
1430 Broadway
New York, New York 10018 U.S.A.
or
Underwriters Laboratories 333 Pfingsten Road
Northbrook, Illinois 60062 U.S.A.
Safe Operating Practices
The Workman is an off–highway vehicle only,
and is not designed, equipped, or manufactured
for use on public streets, roads or highways.
The Workman was designed and tested to offer safe
service when operated and maintained properly.
Although hazard control and accident prevention
partially are dependent upon the design and
configuration of the machine, these factors are also
dependent upon the awareness, concern, and proper
training of the personnel involved in the operation,
maintenance and storage of the machine. Improper use
or maintenance of the machine can result in injury or
death.
4
