Toro TIME CUTTER ZS 4200S, Service Manual

Page: 183 / 215

42 inch Stamped and 42/50/54/60 Inch Fabricated Deck Disassembly (continued)
g302092
Figure 259
9. Using an appropriate blade holding device, remove the 5/8 inch bolt securing
the blade to the deck. Remove the blade from the deck.
10. Remove the 15/16 inch nut securing the spindle to the spindle shaft.
11. Remove the pulley from the spindle shaft.
12. Remove the 4 (1/2 inch) screws securing spindle to the deck assembly.
Remove the spindle assembly.
g309761
Figure 260
13. Remove the spindle from the spindle assembly.
14. Using a drift punch, remove the bearings from the spindle housing. Replace
as necessary.
42 inch Stamped and 42/50/54/60 Inch Fabricated Deck Assembly
1. Using an appropriate sized socket, install the bearings to the spindle housing.
TIMECUTTER® Service Manual Page 7–11 Mower Deck System: Service and Repairs
3433-938 Rev A