Hours
Lists the total number of hours
that the machine, engine and
PTO have been on, as well
as the number of hours the
machine has been transported
and service due
Counts
Lists the number of starts,
cutting unit/PTO cycles, and
fan reversals the machine has
experienced
DPF Regeneration
The diesel particulate filter
regeneration option and DPF
submenus
Inhibit Regen
Use to control reset
regeneration
Parked Regen
Use to initiate a parked
regeneration
Last Regen
Lists the number hours since
the last reset, parked, or
recovery regeneration
Recover Regen
Use to initiate a recovery
regeneration
Counts
Lists numerous counts the
machine has experienced
Diagnostics
Menu Item
Description
Cutting Units
Indicates the inputs, qualifiers
and outputs for raising and
lowering the cutting units.
Hi/Low Range
Indicates the inputs, qualifiers
and outputs for driving in
transport mode.
PTO
Indicates the inputs, qualifiers
and outputs for enabling the
PTO circuit.
Engine Run
Indicates the inputs, qualifiers
and outputs for starting the
engine.
Backlap
Indicates the inputs, qualifiers
and outputs for operating the
backlap function.
Settings
Menu Item
Description
Units
Controls the units used on the
InfoCenter. The menu choices
are English or metric.
Language
Controls the language used
on the InfoCenter*.
LCD Backlight
Controls the brightness of the
LCD display.
LCD Contrast
Controls the contrast of the
LCD display.
Front Backlap Reel Speed
Controls the speed of the front
reels in backlap mode.
Rear Backlap Reel Speed
Controls the speed of the rear
reels in backlap mode.
Protected Menus
Allows a person authorized
by your company with the
PIN code to access protected
menus.
Auto Idle
Controls the amount of time
allowed before returning the
engine to low idle when the
machine is stationary.
Blade Count
Controls the number of blades
on the reel for reel speed.
Mow Speed
Controls the ground speed for
determining the reel speed.
Height of cut (HOC)
Controls the height of cut
(HOC) for determining the reel
speed.
F Reel RPM
Displays the calculated reel
speed position for the front
reels. The reels can also be
manually adjusted.
R Reel RPM
Displays the calculated reel
speed position for the rear
reels. The reels can also be
manually adjusted.
*Only operator-faced text is translated. Faults, Service, and
Diagnostics screens are service-faced. Titles appear in the
selected language, but menu items are in English.
Protected under Protected Menus—accessible only by
entering PIN
About
Menu Item
Description
Model
Lists the model number of the
machine.
SN
Lists the serial number of the
machine.
Machine-Controller Revision
Lists the software revision of
the master controller.
InfoCenter Revision
Lists the software revision of
the InfoCenter.
CAN Bus
Lists the machine
communication bus status.
Protected Menus
There are 8 operating configuration settings that are
adjustable within the Settings Menu of the InfoCenter: auto
idle time delay, Blade Count, Mow Speed, Height of Cut
(HOC), F Reel RPM, and R Reel RPM. These settings can
be locked by using the Protected Menu.
Note:
At the time of delivery, the initial password code is
programmed by your distributor.
Accessing Protected Menus
Note:
The factory default PIN code for you machine is
either 0000 or 1234.
26
