Positioning the Turf Compensating Spring
and Installing the Hose Guide
Cutting Units 4
g375671
Figure 6
1.
Cutting unit 1
5.
Cutting unit 5
2.
Cutting unit 2
6.
Reel motor
3.
Cutting unit 3
7.
Weight
4.
Cutting unit 4
1.
If the hairpin is installed in the rear hole of the
compensation-spring rod—remove the hairpin and
insert it in the hole next to the bracket (
).
g375689
Figure 7
1.
Hairpin
2.
Remove the 2 flange locknuts (3/8 inch) and 2
carriage bolts (3/8 x 1-1/4 inches) that secure the
turf-compensator bracket to the cutting-unit frame
(
g375690
Figure 8
1.
Carriage bolt (3/8 x 1-1/4
inches)
3.
Flange locknut (3/8 inch)
2.
Turf-compensator bracket
3.
Remove the flange locknut (3/8 inch) that secures
the capscrew of the turf compensation spring to
the right tab of the carrier frame, and remove the
compensation spring from the cutting unit (
).
Note:
Do not remove the flange serrated nut from
the capscrew.
g375691
Figure 9
1.
Capscrew
3.
Flange locknut (3/8 inch)
2.
Right tab (Carrier frame)
4.
Assemble the capscrew of the turf compensation
spring to the right tab of the carrier frame (
)
with the flange locknut (3/8 inch).
12
