Toro Reelmaster 5610-D, Owner'S Manual

Page: 47 / 84

Canceling a Parked or Recovery Regeneration
Use the Parked Regen Cancel or Recovery Regen Cancel
setting to cancel a running parked or recovery regeneration
process.
1. Access the DPF Regeneration menu ( Figure 92 ).
g227305
Figure 92
2. Press the center button to scroll down to the P
ARKED
R
EGEN
C
ANCEL
( Figure 92 ) or the R
ECOVERY
R
EGEN
C
ANCEL
option ( Figure 93 ).
g227306
Figure 93
3. Press the right button to select the Regen Cancel
entry (
Figure 92 or Figure 93 ).
Operating Tips
Becoming Familiarized with the Machine
Before mowing grass, practice operating the machine in
an open area. Start and shut off the engine. Operate in
forward and reverse. Lower and raise the cutting units and
engage and disengage the reels. When you feel familiar
with the machine, practice operating up and down slopes at
different speeds.
Understanding the Warning System
If a warning light comes on during operation, stop the
machine immediately and correct the problem before
continuing operation. Serious damage could occur if you
operate the machine with a malfunction.
Mowing
Start the engine and move the engine-speed switch to
the F
AST
position. Move the Enable/Disable switch to the
E
NABLE
position and use the Lower Mow/Raise lever to
control the cutting units (the front cutting units are timed to
lower before the rear cutting units). To move forward and
cut grass, press the traction pedal forward.
Transporting the Machine
Move the Enable/Disable switch to the D
ISABLE
position and
raise the cutting units to the T
RANSPORT
position. Move the
Mow/Transport lever to the T
RANSPORT
position. Be careful
when driving between objects so you do not accidentally
damage the machine or cutting units. Use extra care when
operating the machine on slopes. Drive slowly and avoid
sharp turns on slopes to prevent rollovers. Lower the
cutting units when going downhill for steering control.
After Operation
After Operation Safety
General Safety
•
Park the machine on a level surface.
•
Disengage and lower the cutting units.
•
Engage the parking brake.
•
Shut off the engine and remove the key.
•
Wait for all movement to stop.
•
Allow the machine to cool before adjusting, servicing,
cleaning, or storing it.
•
Clean grass and debris from the cutting units, drives,
mufflers, cooling screens, and engine compartment to
help prevent fires. Clean up oil or fuel spills.
•
Disengage the drive to the attachment whenever you
are hauling or not using the machine.
•
Maintain and clean the seat belt(s) as necessary.
•
Do not store the machine or fuel container where there
is an open flame, spark, or pilot light, such as on a
water heater or on other appliances.
47