Toro Reelmaster 5610-D, Owner'S Manual, Page: 20 / 84

g375326
Figure 36
1. Hood latch 3. Seal
2. Nut 4. Washer
4. Remove the nut from the lock.
5. Outside the hood, insert the hook end of the latch
through the hole in the hood.
Note:
The seal is aligned to the outside of the hood.
6. Inside the hood, Secure the lock to the hood with the
washer and nut.
7. Close the hood, and use the enclosed hood-latch key
to check that the hook of the lock engages the frame
catch when locked.
6
Applying the CE Decals
Parts needed for this procedure:
1 CE decal
1 Production year decal
1 Warning decal
Applying the CE Decal
1. Use rubbing alcohol and a clean rag to clean the area
of the hood next to the hood lock, and allow the hood
to dry. (
Figure 37 ).
g375337
Figure 37
1. CE decal 2. Hood lock
2. Remove the backing from the CE decal.
3. Apply the decal to the hood.
Applying the Year of Production Decal
1. Use rubbing alcohol and a clean rag to clean the floor
bracket area next to the serial plate, and allow the
bracket to dry (
Figure 38 ).
20