•
Torque the bolts (1/2 x 3-1/4 inches) to 91 to
113 N∙m (67 to 83 ft-lb).
•
Torque the bolts (3/4 x 3-1/2 inches) to 322
to 396 N∙m (238 to 292 ft-lb).
7.
Remove the lift-bar assembly and install the
access cover you set aside earlier (
Routing and Connecting the
Hoses
1.
Route the washer tube, heater-supply hose,
and heater-return hoses through the grommet
(
).
g032663
Figure 73
1.
Washer tube
3.
Heater-return hose
2.
Heater-supply hose
4.
Drain tube
2.
Connect the washer tube, heater-supply hose,
and heater-return hose to its counterpart.
3.
Route the drain hose through the grommet and
down the lower ROPS tube (
).
4.
Use cable ties to secure the drain hose to the
ROPS tube.
Connecting the Wire Harness
1.
Route the wire harness from the cab toward the
wire harness from the machine (
).
g032664
Figure 74
1.
Machine wire harness
2.
Cab wire harness
2.
Connect the cab wire harness connectors to the
mating connector on the machine wire harness.
3.
Use cable ties to secure the wires.
Note:
Do not secure the wire harness to hot or
moving parts.
35
