Toro Polar Trac Cab 30474, Operator'S Manual

Page: 33 / 60

13
Installing the Winter Frame
Parts needed for this procedure:
1 Winter frame
2 Coupler link
2 Bolt (3/4 x 4 inches)
2
Washer (3/4 inch)
1 Supply-hose cover
1 Return-hose cover
Pivoting the Cab
1. Remove the 2 bolts securing the access cover
on each side of the machine and set them aside
(
Figure 66 ).
g032781
Figure 66
1. Bolt 2. Access cover
2. Position the lift-bar assembly across the cab
frame (
Figure 67 ).
g032782
Figure 67
1. Lift screw 2. Lift-bar assembly
3. Alternate between turning the lift screws, a
few turns at a time until the cab pivots forward
(
Figure 67 ).
4. Rotate the lift screws a few turns, then alternate
to the other, to pivot the cab forward.
Connecting the Winter Frame to
the Machine
1. Align the winter frame into the machine frame
and roll it back (
Figure 68 ).
g032779
Figure 68
1. Winter frame
3. Jack stands
2. Machine frame
2. Use a floor jack to pivot the machine up and
down when aligning the bolt holes of machine
and winter frame.
3. Use jack stands to support the machine ( Figure
68 ).
33