Figure 16
7.
Turn the ignition key to the Start position (
).
When the engines starts, release the key.
Important:
Do not engage the starter for more
than 5 seconds at a time. If the engine fails to
start, allow a 15 second cool-down period between
attempts. Failure to follow these instructions can
burn out the starter motor.
Note:
Additional starting cycles may be required
when starting the engine for the first time after the fuel
system has been without fuel completely.
ST
ART
RUN
ST
OP
G008947
Figure 17
1.
Off position
3.
Start position
2.
Run position
Stopping the Engine
CAUTION
Children or bystanders may be injured if they
move or attempt to operate the tractor while it is
unattended.
Always remove the ignition key and set the parking
brake when leaving the machine unattended, even
if just for a few minutes.
Let the engine idle at slow throttle (turtle) for 60 seconds
before turning the ignition switch off.
Figure 18
Important:
Make sure the fuel shut-off valve is closed
before transporting or storing the machine, as fuel
leakage may occur. Before storing the machine, pull
wire off spark plug(s) to prevent possibility of accidental
starting.
19
Summary of Contents for GrandStand 74574
Page 65: ...g026979 Electrical Schematic Rev A 65 ...
Page 66: ...Notes 66 ...
Page 67: ...Notes 67 ...
