Driving Forward or Backward
The throttle control regulates the engine speed as measured
in rpm (revolutions per minute). Place the throttle control in
the Fast position for best performance. Always operate the
machine in the full throttle position when mowing.
CAUTION
The machine can spin very rapidly. The operator
may lose control of machine, and may cause
personal injury or damage to machine.
Slow the machine down before making sharp turns.
Driving Forward
1.
Release the parking brake; refer to
Parking Brake (page 16)
.
2.
Move the right side motion-control lever to the center,
unlocked position.
G015234
4
5
1
2
3
3 4
Figure 21
1.
Front reference bar
4.
Right control lever
2.
Left control lever
5.
Right control lever in the
neutral lock position
3.
Rear reference bar
3.
To go forward, move the speed-control lever to the
desired speed.
4.
Slowly push the motion-control levers forward (
Note:
The engine will kill if a motion-control lever is
moved with the parking brake engaged.
Note:
The farther you move the motion-control levers
in either direction, the faster the machine will move
in that direction.
Note:
To stop, pull the motion-control levers back to
the neutral position.
22
Summary of Contents for GrandStand 74574
Page 65: ...g026979 Electrical Schematic Rev A 65 ...
Page 66: ...Notes 66 ...
Page 67: ...Notes 67 ...
