Toro Flex-Force Power System 21863, Manual

Page: 4 / 228

For assistance, please see
www.Toro.com/support
for instructional videos
or contact 1-888-384-9939
before returning this
product.
Introduction
This rotary-blade, walk-behind lawn mower is intended
to be used by residential homeowners. It is designed
primarily for cutting grass on well-maintained lawns
on residential properties. It is not designed for cutting
brush or for agricultural uses. It is designed primarily
to use lithium-ion battery pack Model 81860 (provided
with Model 21863). Using these products for purposes
other than their intended use could prove dangerous
to you and bystanders.
Model 21863T does not include a battery or a
charger.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for more information, including
safety tips, training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
Figure 1
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Important:
With your mobile device, you can
scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information.
g275230
Figure 1
1. Model and serial number location
Contents
Safety ....................................................................... 3
Safety and Instructional Decals .......................... 5
Setup ........................................................................ 8
1 Mounting the Battery Charger
(Optional) ........................................................ 8
2 Unfolding the Handle ....................................... 9
3 Assembling the Grass Bag............................... 9
Product Overview ....................................................11
Specifications ...................................................11
Before Operation ................................................. 12
Installing the Battery Pack ................................ 12
Adjusting the Cutting Height ............................. 13
During Operation ................................................. 13
Starting the Machine......................................... 13
Using the Self-Propel Drive............................... 14
Recycling the Clippings .................................... 14
Bagging the Clippings....................................... 14
Operating the Bag-on-Demand Lever ............... 15
Side-Discharging the Clippings......................... 15
Shutting Off the Machine .................................. 16
Removing the Battery Pack from the
Machine ........................................................ 16
Operating Tips ................................................. 16
After Operation .................................................... 17
Charging the Battery Pack ................................ 17
Cleaning under the Machine ............................. 18
Folding the Handle ........................................... 18
Storing the Machine in the Vertical-Stow
Position ......................................................... 19
Maintenance ........................................................... 20
Lubricating the Machine.................................... 20
Replacing the Blade.......................................... 20
Adjusting the Self-Propel Drive ......................... 21
Preparing the Battery Pack for
Recycling ...................................................... 21
Storage ................................................................... 21
Troubleshooting ...................................................... 22
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
2
Contact us at www.Toro.com.
Printed in China
All Rights Reserved