Toro Flex-Force Power System 21863, Manual

Page: 21 / 228

g251299
Figure 20
5. To unfold the handle, refer to 2 Unfolding the
Handle (page 9) .
Storing the Machine in the
Vertical-Stow Position
You can store your machine in the vertical position to
minimize storage space.
WARNING
Folding or unfolding the handle improperly
can damage the cables, causing an unsafe
operating condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an
Authorized Service Dealer.
1. Remove the electric-start button and battery
from the machine.
2. Ensure that the cutting-height setting on the
machine is 92 mm (3-5/8 inches) or lower; if it is
not, lower it; refer to
Adjusting the Cutting Height
(page 13) .
3. Disengage the handle locks ( Figure 21 ).
g251585
Figure 21
4. Fold the handle fully forward.
Important:
Route the cables to the outside
of the handle knobs as you fold the handle.
5. Engage the handle locks.
6. Lift the front of the machine by the handle and
move it into a storage space (
Figure 22 ).
g251586
Figure 22
19