Toro 41642, Installation Instructions Manual

Page: 14 / 16

InfoCenter Advisories
Operator advisories automatically display on the InfoCenter screen when a machine function requires additional action. For
example, if you attempt to start the engine while pressing the traction pedal, an advisory displays, indicating that the traction
pedal must be in the N
EUTRAL
position.
For each advisory that occurs, there is a condition (e.g., start prevent, engine stopped), an advisory code (number), a qualifier
(the cause of the advisory displayed), and a display text (what the advisory displays as text on the screen) as shown in
Figure 29 .
Figure 29
1. Display text 3. Press any key on the InfoCenter to clear the text from the
display screen.
2. Code
Note:
Advisories do not log into the fault log.
Note:
You can clear an advisory from the display screen by pressing any of the InfoCenter keys.
Refer to the following table for all the InfoCenter advisories:
Condition Code Qualifier Display Text
Start Prevented 2 Pump switch active To start, turn pump off
Start Prevented 3 Not in N
EUTRAL
To start, return traction pedal to
neutral
Start Prevented 4 Out of seat To start, must be seated or set
the parking brake
Start Prevented 5 Starter engage timeout To start, rest starter
Start Prevented 6 Rinse pump active To start, turn off rinse pump
Engine Stopped
102
Out of seat
Engine stop due to operator out
of seat
Engine Stopped 103 Parking brake set Engine stop due to parking
brake engaged
Pump Start Prevented 202 Boom active To start pump, turn booms off
Pump Start Prevented 203 Out of seat and parking brake
not set To start pump, must be seated
or set parking brake
Pump Start Prevented 205 Engine starting To start pump, stop cranking
engine
Pump Turned Off 206 Out of seat To start pump, remain seated
Tank Status 402 Low spray tank volume Tank status, volume low
Tank Status 403 Rinse pump active Tank status, rinse pump on
Parameter Status 502 Wrong parameter value entered Parameter status, invalid value
14