Toro 41642, Installation Instructions Manual

Page: 6 / 16

Set Rates Screen
To access the Set Rates screen, press button 2 on the Main
Menu screen (
Figure 6 ) until you reach Set Rates and press
button 4 to select Set Rates ( Figure 7 ).
This screen displays and allows you to set the Target Rate,
Rate 1, Rate 2, and the Boost-rate percentage.
To set Rate 1, Rate 2, or the Boost-rate percentage, refer to
the following:
1. Press button 1 or 2 until you reach the desired rate or
boost-rate percentage (
Figure 7 ).
2. Press button 4 to select or edit the rate.
Figure 7
3. In the screen for the selected rate, use buttons 3 and
4 to set the desired rate (
Figure 8 ).
Note:
You can change the rate faster by pressing and
holding button 3 or 4.
Figure 8
Note:
From the home screen, press and hold buttons
1 and 2 simultaneously to select Rate 1 or press and
hold buttons 4 and 5 simultaneously to select Rate 2.
Note:
From the Home screen, press and hold buttons
1 and 5 simultaneously to apply boost rate.
Boost is active only as long as you hold buttons 1 and
5, then returns the set rate when you no longer press
and hold the buttons.
4. Press button 5 to exit the Set Rates screen, to save the
rate setting, and return to the Main screen.
Settings Screen
To access the Settings screen, press button 2 on the Main
Menu screen (
Figure 6 ) until you reach Settings and press
button 4 to select Settings ( Figure 9 ).
This screen allows you to view and change the settings for the
tank, display, boom width, and to reset default settings.
Figure 9
Tank Settings
1. Press button 4 on the Settings screen to select Tank
settings (
Figure 9 ).
2. Press button 2 until you reach the item that you would
like to change (
Figure 10 ).
3. Use buttons 3 and 4 to set the desired value ( Figure 10 ).
6