Toro 41642, Installation Instructions Manual

Page: 7 / 16

Figure 10
Note:
Volume indicates the current amount of
liquid in the tank. The low-limit setting alerts you
when the tank volume has fallen below the specified
low-limit-tank volume. This setting can be turned
on or off. You can increase or decrease agitation by
pressing buttons 3 and 4.
Display Settings
Change the units of measure as follows:
1. Press button 2 on the Settings screen until you reach
Display settings and then press button 4 to select
Display (
Figure 9 ).
2. Press button 1 or 2 until you reach Units and then press
button 4 to select Units.
3. Press button 1 or 2 until you reach the desired unit and
then press button 4 to select this unit.
•
English: mph, gallons, acre
•
Turf: mph, gallons, 100 ft²
•
SI (metric): kph, liter, hectare
Change the InfoCenter display backlight/contrast as follows:
1. Press button 2 on the Display settings screen until you
reach Backlight or Contrast (
Figure 11 ).
2. Use buttons 3 and 4 to set the desired value ( Figure 11 ).
Figure 11
Change the InfoCenter protected menus as follows:
1. Press button 2 on the Display settings screen until you
reach Protected Menus, then press button 4 to select
Protected Menus (
Figure 12 ).
Figure 12
2. Press button 2 until you reach the desired protected
menu item (
Figure 12 ).
3. Press button 4 to select and deselect each protected
menu item (
Figure 13 ).
7