!"# !" #"!
!"
!"
#!!
# "#
!# "
,*
Mount (2) seat back brackets to each seat back
cushion with (4) 1/4-20 x 3/4" lg. capscrews and 1/4"
flat washers. Position brackets on seat back cushions
as shown in figure 5.
64+,10 4)&5 '&(-
!)&5 '&(- '3&(-)5
,*63)
Mount cushion with seat back brackets to right
side of seat back with (4) 5/16-18 x 5/8" lg. carriage
bolts and flange locknuts.
Slide manual tube into (2) R-clamps.
,*63)
64+,10 4)&5 '&(-
!)&5 '&(- '3&(-)5
!)&5 '&(-
&06&. 56')
(.&/2
Mount cushion with seat back brackets and
manual tube R-clamps to left seat back with (4)
5/16-18 x 5/8" lg. carriage bolts and flange locknuts.
!" !
,*
Insert each side of ROPS into mounting bracket on
each side of vehicle frame, positioning ROPS as shown
in figure 7.
Secure each side of ROPS to mounting brackets
with (2) 1/2-13 x 3" lg. capscrews and locknuts.
!
1605,0* '3&(-)54
,*63)
"
"$" "" %
,*
If Battery is not filled with electrolyte or activated, it
must be removed from vehicle, filled with electrolyte
and charged. Bulk electrolyte with 1.260 specific
gravity can be purchased from a local battery supply
outlet.
Loosen knobs securing battery cover to battery
base and slide cover off.
Remove capscrew, washers and locknut securing
battery hold down to battery base. Remove hold down
and slide battery out of battery base.
,*63)
&55)38 (17)3
01'
&55)38 '&4)
