decal133-4901
Figure 35
Model 03821
1.
8-blade reel adjustment
3.
Read the
Operator’s Manual
for information on adjusting the
reel.
2.
11-blade reel adjustment
4.
To set the reel speed, rotate the knob (
) until the indicator arrow is in line with the
number designating the desired setting.
g020259
Figure 36
1.
Reel speed control knob
Note:
The reel speed can be increased or
decreased to compensate for turf conditions.
When using baskets, increase the reel speed to
improve collection performance.
Adjusting the Lift-Arm
Counterbalance
You can adjust the counterbalance on the lift arms of
the rear cutting units to compensate for different turf
conditions and to maintain a uniform height of cut in
rough conditions or in areas of thatch buildup.
You can adjust each counterbalance spring to 1 of
4 settings. Each increment increases or decreases
counterbalance on the cutting unit by 2.3 kg (5 lb).
You can position the springs on the back side of the
first spring actuator to remove all counterbalance
(fourth position).
1.
Park the machine on a level surface, lower the
cutting units, engage the parking brake, shut off
the engine, and remove the key from the ignition
switch.
2.
Insert a tube or similar object onto the long
spring end to relieve the spring tension during
the adjustment (
).
CAUTION
The springs are under tension and could
cause personal injury.
Use caution when adjusting them.
28
Summary of Contents for 03820
Page 53: ...Notes ...
Page 54: ...Notes ...
