Toro 03662, Installation Instructions Manual

Page: 5 / 8

Figure 6
1. Support tube 3. Flange-head bolt
2. Carrier frame 4. Flanged locknut (3/8 inch)
2. Secure the carrier frame to the cutting-unit side-plates
with 2 flanged locknuts (3/8 inch) (
Figure 6 ).
6
Mounting the Basket Assembly
to the Cutting Unit
Parts needed for this procedure:
1 Basket assembly
Procedure
Mount a basket to each cutting-unit carrier-frame by inserting
the basket-mounting pin into the basket-guide bracket and
depressing the opposite mounting pin into the pivoting-basket
bracket (
Figure 7 ).
Important:
Ensure that the front of the basket does not
contact the reel. If there is contact, refer to 7 Adjusting
the Basket Position (page 6) .
Figure 7
1. Basket-mounting pin 3. Pivoting-basket bracket
2. Basket guide
5