Toro 02858, Installation Instructions Manual

Page: 4 / 16

7. Plug the 2-socket connector
REVERSE SOLENOID
into the 2-pin connector of the coil ( Figure 6 ).
8. Repeat steps 1 through 7 at the other side of the
rear traction manifold.
Installing the
Quick-Connect Test Fitting
Machines without the Optional
Road Light Kit or Differential-Lock
Kit
Installing the Quick Connect
Fitting
Model 31654
1. At the right side of the traction pump, remove
the plug from the T-fitting in port-B of the traction
pump (
Figure 7 and Figure 8 ).
g344293
Figure 7
g344289
Figure 8
1. T-fitting (port-B—traction
pump) 3. Adapter fitting (1/4 x 7/16
inch)
2. Plug
2. Assemble the adapter fitting (1/4 x 7/16 inch)
into the T-fitting (
Figure 8 ).
3. Torque the assemble the adapter to 34 to 41
N∙m (25 to 30 ft-lb).
4. Assemble the quick-connect fitting into the
adapter fitting (
Figure 9 ).
g344290
Figure 9
1. Adapter fitting 3. Dust cap
2. Quick-connect fitting
4