Toro 02858, Installation Instructions Manual

Page: 13 / 16

g344072
Figure 36
1. 3-pin connector (labeled
BRAKE PRESSURE SENSOR
)
2. Brake-pressure
transducer
Installing the Dust Cap
Machines without the Optional Road Light Kit
or the Optional Differential-Lock Kit
1. At the right side of the traction pump, remove
the test equipment from the quick-connect fitting
(
Figure 37 ).
g343559
g344105
Figure 37
2. Assemble the dust cap over the quick-connect
fitting (
Figure 38 ).
g344079
Figure 38
Installing the Dust Cap
Machines with the Optional Differential-Lock
Kit
1. Raise the operator’s platform; refer to the
Operator’s Manual .
2. Remove the test equipment from port-TPB of
the front traction manifold (
Figure 39 ).
g344124
Figure 39
3. Install the dust cap over the Minimess fitting in
port-TPB (
Figure 40 ).
13