Toro 02858, Installation Instructions Manual

Page: 11 / 16

Note:
Retain the quick-connect fitting.
g344321
Figure 28
1. Adapter fitting 2. Quick-connect fitting
3. Assemble the brake-pressure transducer into
the adapter fitting (
Figure 29 ).
g344291
Figure 29
1. Adapter fitting (1/4 x 7/16
inch) 2. Brake-pressure
transducer
4. Torque the brake-pressure transducer to 27 N∙m
(20 ft-lb).
5. Plug the 3-pin connector of the machine wire
harness labeled
BRAKE PRESSURE SENSOR
into
the connector of the pressure transducer ( Figure
30 ).
g344324
Figure 30
1. Brake-pressure
transducer 2. 3-pin connector (labeled
BRAKE PRESSURE SENSOR
)
Installing the Dust Cap
Machines without the Optional Road Light Kit
1. Disconnect the test equipment from the
quick-connect fitting (
Figure 31 ).
g344293
g344319
Figure 31
2. Assemble the dust cap over the quick-connect
fitting (
Figure 32 ).
11