Toro 02858, Installation Instructions Manual

Page: 12 / 16

g344317
Figure 32
Finishing the Hydraulic
Test
Models 31657 and 31659
Installing the Brake-Pressure
Transducer
Machines with the Optional Road Light
Kit—and without the Optional Differential-Lock
Kit
1. Disconnect the test equipment from the
quick-connect fitting (
Figure 33 ).
g343559
g344106
Figure 33
2. Remove the quick-connect fitting from the
reducer fitting (
Figure 34 ).
Note:
Retain the quick-connect fitting.
g344071
Figure 34
1. Reducer fitting (3/4 x 7/16
inch) 2. Quick-connect fitting
3. Assemble the brake-pressure transducer ( Figure
35 ) into the reducer fitting (3/4 x 7/16 inch).
g344080
Figure 35
1. Reducer fitting (3/4 x 7/16
inch) 2. Brake-pressure
transducer
4. Torque the transducer to 27 N∙m (20 ft-lb).
5. Plug the 3-pin connector of the machine wire
harness labeled
BRAKE PRESSURE SENSOR
into
the connector of the pressure transducer ( Figure
36 ).
12