Toro 02858, Installation Instructions Manual

Page: 3 / 16

Installing the Rear
Traction-Manifold
Solenoids
1. At the back of the machine, remove the check
valve from port-CV of the traction manifold
(
Figure 3 ).
g343945
g343934
Figure 3
1. Check valve 2. Port-CV (rear traction
manifold)
2. Assemble the high-pressure valve into port-CV
(
Figure 4 ).
g343932
Figure 4
1. High-pressure valve 2. Port-CV (rear traction
manifold)
3. Torque the high-pressure valve to 110 N∙m (81
ft-lb).
4. Assemble the coil and nut onto high-pressure
valve as shown in
Figure 5 .
g343931
Figure 5
1. Coil 3. Nut
2. High-pressure valve
5. Torque the nut to 8 N∙m (6 ft-lb).
6. Remove the cap from the 2-socket connector
of the machine wire harness labeled
REVERSE
SOLENOID
( Figure 6 ).
g343933
Figure 6
1. 2-socket
connector—machine
wire harness (labeled
REVERSE SOLENOID
)
2. 2-pin connector—coil
3