Toro 02858, Installation Instructions Manual

Page: 7 / 16

g344403
Figure 16
6. Connect the battery, lower the hood, and perform
the hydraulic-pressure test; refer to
Connecting
the Battery (page 9) , Closing the Hood (page 9) ,
and Testing the Hydraulic Pressure (page 10) .
Preparing the Traction Pump
Machines with and without the Optional Road
Light Kit
1. At the right side of the traction pump, assemble
the test equipment onto the quick-connect fitting
(
Figure 17 ).
g344318
Figure 17
2. Connect the battery, lower the hood, and perform
the hydraulic-pressure test; refer to
Connecting
the Battery (page 9) , Closing the Hood (page 9) ,
and Testing the Hydraulic Pressure (page 10) .
Preparing to Test the
Hydraulic Pressure
Models 31657 and 31659
Installing the Quick-Connect
Fitting
Machines with the Optional Road Light
Kit—and without the Optional Differential-Lock
Kit
1. At the right side of the traction pump, remove
the 3-pin connector labeled
BRAKE PRESSURE
SENSOR
from the brake-pressure transducer
( Figure 18 ).
g343559
g344072
Figure 18
1. 3-pin connector (labeled
BRAKE PRESSURE SENSOR
)
2. Brake-pressure
transducer
2. Remove the brake-pressure transducer ( Figure
19 ) from the reducer fitting (3/4 x 7/16 inch).
7