TORAY UF
Instruction Manual
06-G-MB2-HFUG-B2315AN-220930
33 of 35
In the case of cleaning with acid and with sodium
hypochlorite alternately, rinse the cleaning line and the
module with clean water thoroughly after each cleaning.
Use product water for rinsing and make sure that pH of
the water in the module is in the range between pH 6.5
and 7.5 after rinsing.
Do not use any other chemicals than those indicated
above.
Do not mix sodium hypochlorite with acid. Such mixture
generates toxic chlorine gas.
The chemical cleaning should be done at least once a year. Otherwise, the module
filtration performance could be reduced.
!
!
Instruction
