TORAY UF
Instruction Manual
06-G-MB2-HFUG-B2315AN-220930
21 of 35
(5) Confirm that the air is out of the module, and then close the air exhaust valve (V-4).
(6) Set appropriate volume of filtrate flow.
Do not exceed 300 kPa (43.5 psi) to avoid damage to
the module.
Operating conditions including the filtration flux and the
physical cleaning should be properly set up to observe
the rise of trans-membrane pressure (Details are
described in the next session). Please contact us for any
technical support if necessary.
(7) When stopping the operation, gradually close the feed water valve (V-1).
