Toppro T2208, User Manual, Page: 42 / 52

DSP Control
The preset can be recalled to the same channel with exactly the same DSP setting and other
setting like Solo, Mute, Post..., but with the channel's own DSP setting if recall to other channels.
For example, if you select Channel 6 and save the setting as scene preset 6. If you select the
Channel 6 and press the Load button to load the scene preset 6, then, the Channel 6 will be
exactly same as the scene preset 6. But if you choose other channel like Channel 7, the DSP setting
will be same as the Channel 7 and other settings will be same as preset 6.
Select a channel or bus that you want to copy its settings onto other channels, then
press Copy button, you can see the selected channel or bus will flash. Touch OFF of
other channel or bus, it will turn to ON and the background will illuminate red, which
means you are ready to copy.
This will show current channel that will be copied to other
channels or buses. Touch Previous Channel or Next Channel to
select.
Touch above controls, the hook mark will come up, which means you have selected the controls
and ready to copy their parameters to other channels or buses. The default setting is select all.
Then touch Copy control to complete your operation.
In the process of operation, please keep an eye to the LCD screen display.
6.17 Copy interface
Copy
System
Polarity Gain Delay Gate EQ Assign Send Comp
Back
To
Previous
From
Copy to:
Ch01
Select
Ch01 Ch08 Ch02 Ch03 Ch04 Ch05 Ch06 Ch07
Ch09 Ch16 Ch10 Ch11 Ch12 Ch13 Ch14 Ch15
Aux6 Aux7 Aux8 Aux5
Ch17-18 Ch19-20 FX1 FX2 USB Main
Aux1 Aux2 Aux3 Aux4
From
Back
To
Mixer
Copy
Select
Ch01
From
From Copy to:
Ch01
Select Select
Polarity Gain Delay Gate EQ Assign Send Comp
Copy
42
6