
DSP Control
Slide the fader to change selected input channel audio.
The fader function is the same with
Fader
on the panel,
which can control input signal’s level, they will change
synchronously.
Meter
beside it indicates the signal level activity.
Pan
above fader indicates value of pan setting.
Solo
can monitor selected channel audio.
Mute
can silence selected channel audio.
Long press
CH01
can rename the selected channel.
Adjust this parameter to change selected output
channel audio. This fader function is the same
with Parameter Adjust knob, they will change
synchronously.
Touch pan left or right to change signal’s
balance effect, it can be adjusted by
Parameter Adjust knob on the panel when
pan button is on.
If you have adjusted a channel pan, please just touch 2 times on the screen and make it back to
the centre position.
For the details please refer to the Pan introduction in section 5.
Touch anyone of these controls to enter corresponding
page.
Touch it, the background and Link button will illuminate synchronously, and current
channel will link to its default paired-channel, the button will illuminate then.
Touch Select icon here, all input channels will display to you. Please follow the
indication on the LCD screen to operate.
For different input channels, the function and output assignments are different,
please notice indication on the screen.
Solo
Mute
CH08
-10.5dB
CH08
Parameter
Aux 1
-10.5dB
Left
Right
Pan
Select
Channel
Link
Load
Save
48V
Phase
Copy
Channel
23
6
Summary of Contents for T2208
