Toppro T2208, User Manual, Page: 32 / 52

Touch Load, Save to realize corresponding function.
Touch this control in this area to enter page of corresponding channel.
Touch ON/OFF switch, it will illuminate and enable the GEQ
function.
Compare with ON in other page, the different is that even you don’t turn on it, the GEQ
parameter is adjustable, but won’t function.
Text Default in the box shows preset of GEQ. You can change it by loading another parameter
setting.
The GEQ settings can be saved as preset for future use by pressing the Save button and flowing
instruction that is shown on the LCD display. Please notice that the assign state will not be saved
when one GEQ setting is saved as preset (assign state could be saved in scene option) . The preset
can be recalled by pressing the Load button and deleted by pressing the Flat EQ button after it
has been chosen. Please notice the instruction that is shown on the LCD display. Please take
section of DSP Load, Save, Copy as reference.
6.9 FX1-2 interface
The setting values of FX1-2 can be saved as preset for future use by simply touching the Save
button and following the instruction that is shown on the LCD display.
Touch anyone of these controls to adjust parameter of the effects by rotating Parameter Adjust
knob or slide fader on the right of LCD screen.
DSP Control
Load Save
Select
Channel
Default
ON
Solo
Mute
CH08
Parameter
Delay
-10.5dB
Effect Type:
Parameters:
Load Save
Tremolo
ChorusRev
Hall
Flanger
St Delay
Flanger Rev
Room
Chorus
Plate
DelayRev
Delay
StDelayRev
Attack
Decay Hi Damp
Efx Out
Dry Out Dry Out
0 0 0 0 0 0
-10.5dB
CH08
Bank Select
Left
Bank Select
Right
Long
Faders
All Faders
DCA
Assign
Channel
Gate
Comp
PEQ
GEQ
FX 1
FX 2 Routing
System
EQ
Tremolo
ChorusRev
Hall
Flanger
St Delay
Flanger Rev
Room
Chorus
Plate
DelayRev
Delay
StDelayRev
32
6