Toppro T2208, User Manual, Page: 15 / 52

˙
Link & DCA: After link, the channels can also be grouped to DCA as stereo channel, but not able
to cancel the link in DCA. On the contrary, if the channel has been grouped to DCA, it can not link
at all, but its paired channel can link.
For example, channel 5 is linked with channel 6, then both channel 5 and 6 can be grouped to
DCA. But if channel 5 has been grouped to DCA first, it can not link to channel 6, but channel 6
can link to channel 5.
˙
Link & Routing: The two linked channels can route as stereo channel, while routed channels can
also link later.
Please note that this is a nondestructive passing, the other channel's previous setting will be
restored after the Link button is disengaged. For example, when Channel 6 has been selected,
then press Stereo Link button, all of Channel 6's setting will be copied onto Channel 5. The
Channel 5's own setting will restore after the Link button has been disengaged.
23. Mute button
Press this button will mute selected channel and all of its assigned
outputs. It will illuminate when the button has been pressed and
enabled.
24. FX Mute button
This button is for FX function, when press it, effects of FX1-2 will be mute synchronously, which
is similar to MUTE button.
25. Motor Fader
There is only one motor fader to control all digital Channel’s level, including 20 main
input channels, 1 USB in, 8 AUX outputs, FX1-2 and 1 Main output channel.
26. AUX1-8 select buttons
This button function is similar to input channel select buttons.
Press this button will route its channel to add DSP setting and assign its output. It will
illuminate as has been pressed and enabled. In DCA window, you can select group
channels by this button.
27. FX1-2 select buttons
This button function is also similar to input channel select buttons and AUX1-4 select
buttons. For the details, please refer to point 22 or 1.
Control
Volume
23 24
25
26 27
15
5