Toppro T2208, User Manual, Page: 18 / 52

39. Line inputs 17-20
The 17-20 Line Inputs are normally used as effects returns. A line bus can be used to send several
channels to an external effects processor and also can be used to return the processed signal to
the mixer. The input is balanced stereo. If a mono signal has to be returned to the mix, connect it
to the left input, then the right as well as the left side will get the signal.
40. Insert
Only channel 1-8 are equipped with insert function, while others are not.
The direct-insert point is an unbalanced 1/4-inch connector which can be used to connect
external processors. The insert's sending is after the channel's gain control and before the digital
bus. But the return goes to the digital bus directly. So if a de-esser has been inserted on the
vocalist's channel, the de-esser will get an unprocessed, amplified signal. The processed signal will
return to the T2208's digital bus to add DSP setting and sent through Aux and FX buses…
41. Aux Outputs1-8
These are balanced mono outputs for each auxiliary.
42. Headphones out HP1 and HP2
They are the headphone’s port for monitoring.
43. USB AUDIO in/Out
This port is for USB audio input and output. You can connect it to WINDOWS/MAC system
without any USB driver.
44. CTRL Out
These are the balanced control-room outputs. The level is controlled by the knob in the Control
Room on the top panel.
45. Main Output
The T2208 features both XLR and TRS main outputs. These outputs are parallel to each other.
46. USB connect port
This port is for remote control or firmware update.
47. Ethernet connect port
This port is for Ethernet control or firmware update.
NOTE: You can choose T-WIFI module to change Ethernet/USB module to WIFI/USB module.
48. AC Input
The provided power cable can be plugged in.
49. Power Switch
Power switch ON or OFF
50. Optional module
Select our optional module that you want for extra function.
(1) T-DANTE module : DANTE networking module.
(2) T32USB-EXP module:32 I/O Multi-track recording module.
Please contact with your distributor to get more information about the optional modules.
Control
HP1
HP2
18
5