Page 16 of
93
After running the program, you need to select the correct network card in "Interface" and click the "Search"
button. Select the camera, right-click, and click the "Config" button in the pop-up page.
(Please Note : If the camera cannot be searched, please connect the camera and computer directly with a
network cable, and then re-run upgrade tool. Or read Section B on page 17, manually modify the IP
address of the computer network card to 192.168.100.x, and then log in to the camera WebUI to modify the
camera IP.)
Next, entering the correct values, click the Set button to save. The examples of this book, the IP of our
Mac is 192.168.199.104, so we plan to set the IP of the camera to 192.168.199.77.
