increases with adding user one by one and ignores deleting user. Common
Access Password has no ID.
⚫
All passwords can be 3-6 digits in length.
⚫
Programming password is used for programming.
⚫
Access password is used to activate the gate when the keypad has been set to
“password” or “password or card” mode.
⚫
Card password is needed to enter after swipe the card when the keypad has
been set to
“pa card” mode.
⚫
Factory default program password is 123456.
6.1 How to Change the Programming Password
# Old Programming Password # 0 New Programming Password #
6.2 How to Set Common Access Password
# Programming Password # 21 new Common Access Password #
6.3
How to Add Private Access Password (PIN)
# Programming Password # 22 (3-6 digits access password) #
NOTE: The quality of access passwords can be set up to 1000 sets. You can input
access password and then press # to activate the keypad.
6.4 How to Add User Card
# Programming Password # 1 read card #
NOTE: If add multi cards, read cards continuously.
6.5 How to Delete All Users
# Programming Password # 40 0000 #
NOTE: Delete all cards and PIN except Common Access Password.
6.6 How to Delete User by Read Card
# Programming Password # 41 read card #
NOTE: If delete multi cards, read cards continuously
6.7 How to Add Card by Input Card NO.
# Programming Password # 23 input card NO. #
NOTE: Card No. is 10-digit or 8-digit, machine auto-identify.
6.8 How to Add Multi-card by Input Card NO. Zone
# Programming Password # 24 input start card No. card Qty #
NOTE: Card Qty is 4-digit (If one-time add twenty cards, input 0020)
6.9 How to
Add “card +PIN” User
# Programming Password # 3 read card PIN #
NOTE: You can change the PIN according to following instructions. After reading
card and input corresponding PIN to open the door, within 5 seconds, long press
