![background image](http://html.mh-extra.com/html/russound/kp4-kp6/kp4-kp6_instruction-manual_1502308001.webp)
28-1201 07/29/05
KP6/KP4 Keypad
Source
CABLE
AM/FM
XM1
SERVER1
1
2
3
4
6
The KP6/KP4 keypad is an in-wall Decora
®
style, single-gang
keypad designed for individual zone control of CAA66/CAS44
distributed audio systems (wall plate not included). It has
amber backlit, soft-touch volume, power and source select but-
tons. The KP6 keypad supports the KPSC keypad to add
source control and numeric control capability.
SOURCE NAME - Clear window with replaceable source
name labels. Current source selected is backlit amber.
VOLUME UP - Raises the volume for the room and
adjusts user option features.
SOURCE SELECT - Scrolls through the available sources.
Press and hold brings up the USER MENU for Loudness,
Bass, Treble, etc.
VOLUME DOWN - Lowers the volume for the room and
adjusts user option feature.
IR RECEIVER - Receives IR signals and passes them to
the controller and source equipment. Also used when
the keypad is operated using the CA System remote controls.
IR CONFIRMATION/LOUDNESS LED - Blue LED blinks to
confirm IR signal reception, and remains lighted when
Loudness feature is enabled.
POWER - Turns room ON or OFF when pressed once;
when OFF, press and hold to turn off all rooms; remains
lit as system indicator.
VOLUME LEVEL - Volume level indicator LEDs light up
from left to right to indicate volume level. Also indicates
user option adjustments.
3
2
4
5
1
6
Warranty Repair
The Russound KP6/4 is fully guaranteed against all defects in materials
and workmanship for two (2) years from the date of purchase. During
this period, Russound will replace any defective parts and correct any
defect in workmanship without charge for either parts or labor.
For this warranty to apply, the unit must be installed and used according
to its written instructions. If service is necessary, it must be performed
by Russound. The unit must be returned to Russound at the owner's
expense and with prior written permission. Accidental damage and ship-
ping damage are not considered defects, nor is damage resulting from
abuse or from servicing by an agency or person not specifically author-
ized in writing by Russound.
This Warranty does not cover: Damage caused by abuse, accident, mis-
use, negligence, or improper installation or operation; Power surges and
lightning strikes; Normal wear and maintenance; Products that have
been altered or modified; Any product whose identifying number, decal,
serial number, etc. has been altered, defaced or removed.
Russound sells products only through authorized Dealers and
Distributors to ensure that customers obtain proper support and serv-
ice. Any Russound product purchased from an unauthorized dealer or
other source, including retailers, mail order sellers and online sellers will
not be honored or serviced under existing Russound warranty policy.
Any sale of products by an unauthorized source or other manner not
authorized by Russound shall void the warranty on the applicable prod-
uct.
Damage to or destruction of components due to application of exces-
sive power voids the warranty on those parts. In these cases, repairs
will be made on the basis or the retail value of the parts and labor. To
return for repairs, the unit must be shipped to Russound at the owner's
expense, along with a note explaining the nature of service required. Be
sure to pack the unit in a corrugated container with at least three (3)
inches of resilient material to protect the unit from damage in transit.
Before returning a unit for repair, call Russound at (603) 659-5170 for a
Return Authorization number. Write this number on the shipping label
and ship to: Russound, ATTN: Service, 5 Forbes Road, Newmarket, NH
03857
Due to continual efforts to improve product quality as new technology
and techniques become available, Russound/FMP, Inc. reserves the right
to revise system specifications without notice.
All trademarks are property of their respective owners.
Technical Specifications
Dimensions:
1.85"W x 2.7"D x 1.47"H
(4.7 x 6.9 x 3.7 cm)
Fits 1 Gang UL/CSA Approved 18 ci
Junction Box
Weight:
4.0 oz. (113 g)
Power Requirements:
12 VDC 180mA
CAT-5 Connection:
110 punchdown
5 Forbes Road, Newmarket, NH 03857
tel 603.659.5170 • fax 603.659.5388
e-mail: [email protected]
www.russound.com
5
7
7
Source
DVD CABLE
XM1 AM/FM
KP4 Keypad
8
8
Source
CABLE
AM/FM
XM1
SERVER1
Bass
Treble
Balance
Turn On
Volume
Press and
hold Source
button to
enter or exit
User Options
Mode
Press Source
button to
select option
Press Volume
Up or Down
buttons to
adjust setting
Button will blink to indicate the
option that is ready for adjustment
Source 2
Source 3
Source 4
Source 5
Source 6
Source 1
Option setting level
User Options Mode
The User Options Mode allows the user to adjust the audio proper-
ties of a particular zone. The audio features that can be adjusted
are: Bass, Treble, Balance, Turn On Volume and Loudness.
To enter the User Options Mode, press and hold the Source button
when the zone is on. To exit the mode, press and hold the Source
button again (or wait for a 9-second timeout).
The first four source buttons double as indicators for audio feature
selection. When entering the User Options Mode, the top left
(Source 1) button will temporarily blink to indicate “Bass” is ready
for adjustment. Subsequent presses of the Source button toggle
through Treble (Source 2), Balance (Source 3), Turn On Volume
(Source 4), and Loudness (blue LED).
Once an option is selected, the volume up/down buttons are used
to adjust settings. The volume indicator LEDs temporarily light to
indicate the option setting. When Loudness is turned on, the blue
LED lights solid.
Blue LED will blink to
indicate Loudness is ready
for adjustment
Source Label Installation
Note: Source labels must be inserted prior to installing the trim
plate on the keypad.
1.
Determine the system’s source names and numbers
(e.g., CD, Source 1).
2.
Select the corresponding source name label from the includ-
ed label sheets. Left-side labels are used for sources 1, 3
and 5; right-side labels are used for sources 2, 4 and 6.
3.
Slide the label into the window slot until the source name is
centered in the window.
KP6/KP4 Source Labels
KP6 Keypad Front Panel