The LCD screen will
guide you with detailed
messages.
Use the arrow buttons to
scroll the menu or
choices.
ON
= AC power
OFF
= Power failure
When Green:
ON
= Zones closed
OFF
= Zone(s) open
FLASH
= Exit Delay
When Red:
ON
= Area(s) armed
OFF
= Area(s) disarmed
FLASH
= Alarm
AC LIGHT
STATUS LIGHT
DGP2-641/DGP2-641AC
HOW TO ARM
Enter your
[
ACCESS CODE
]
, and then...
To
Regular
Arm:
Press the
[
ARM
]
button.
(Arms entire area when all zones are closed)
To
Force
Arm:
Press the
[
FORCE
]
button.
(Arms entire area without waiting for all zones to close)
To
Stay
Arm:
Press the
[
STAY
]
button.
(Arms area’s perimeter only, which allows you to remain in the protected area)
To
Instant
Arm:
Press the
[5]
button.
(Stay arms area, but an alarm will occur instantly if zones open, including entry
delay zones
)
If you have access to more than one area, select the desired area, or press the
[0]
button for all areas.
1.
2.
HOW TO DISARM
HOW TO BYPASS ZONES
ALARM MEMORY DISPLAY
When a zone is bypassed, it remains
unarmed once the corresponding area
is armed.
Enter your
[
ACCESS CODE
]
.
Press the
[
BYP
]
button.
Use the
[
!
]
and
[
"
]
buttons to
scroll through the zones, and then
press
[
BYP
]
once the desired zone
appears on the screen. If necessary,
repeat to bypass more zones.
Press
[
ENTER
]
to save and exit.
To view the alarms that occurred during
the last armed period:
Press the
[
MEM
]
button.
All the zones that were breached
during the last armed period will
scroll on the screen.
Press
[
CLEAR
]
to exit.
[
CLEAR
]
= Erases current data entry or reverts to the preceding step.
[
ENTER
]
= Saves current data and exits current menu.
User’s Quick Reference Guide
PANIC BUTTONS
To send a silent or audible alarm to your Security Company, press and hold one of
the button combinations listed in the table below for 2 seconds.
Panic Alarm Type
Button Combinations
Emergency Panic
Press and hold the
and
buttons
[1] [3]
Fire Panic
Press and hold the
and
buttons
[7] [9]
Auxiliary Panic
Press and hold the
and
buttons
[4] [6]
To
Disarm
when entering:
To
Disarm
from within the perimeter:
Enter your
[
ACCESS CODE
]
.
Select the area(s) if necessary.
1.
2.
Enter your
[
ACCESS CODE
]
, and then
press the
[
DISARM
]
button.
Select the area(s) if necessary.
1.
2.
1.
2.
1.
2.
3.
4.
*Some features mentioned in this Quick Start need to be activated by your Installer.
*We recommend that you test your security system on a weekly basis.
Press the corresponding
one-touch button for 2
seconds to perform an
action without entering
your Access Code.
Ma d
e in
C
A N A D A
