TOPMAQ LM175P, User Manual

Page: 2 / 7

1 long buzz Programming success
Continuous long buzz Restoring factory programming passwords
4. Definition of the output wires:
JP1 terminal
：
JP2 terminal
：
*NOTE: The red wire of the both 2 terminals has been cut off and it has been
soldered to the PCB of the keypad. Thus you can connect the 12-24VDC power
supply to the RED wire on the PCB and the BLACK wire of JP2 to power up the
keypad.
5. Wire connection of the keypad to the gate & door opener
NOTE: Below wiring diagram is a universal wiring diagram of the connection
between the keypad and the opener. You can refer to the user manual of the
TOPENS gate opener for detailed wiring diagram.
NO Mark Color Function
1* +12V X This wire has been cut off
2 GND Black Power-(12-24VDC negative)
3 DATA0 Green WG DATA0
4 DATA1 White WG DATA1
5 NC Brown Relay NC output
6 COM Blue Relay Com output
7 NO Purple Relay NO output
NO Mark Color Function
1* +12V X This wire has been cut off
2 GND Black Power-(12-24VDC negative)
3 PUSH BLUE Low level output
4 OPEN Yellow Door Release
5 BELL Grey BELL
6 BELL White BELL