Topcon UA-10 Series, Instruction Manual

Page: 183 / 534

181
3.17.6 Setting Filtering Order
This function is used to set the filtering order.
To set the filtering order, go through the following steps.
1 Select [Setting]
– [Filtering], and the [Filtering] dialog will open.
2 Select items from the [Filter] list.
3 Press the [>> add] button, and the selected items are set in the [Order/Filter] list.
To change the filtering order, select the desired item from the [Order/Filter] list and
change the order with the [UP]/[DOWN] buttons.
To delete the set item, select the desired item from the [Order/Filter] list. Press the [<<
delete] button, and the selected item is deleted from the [Order/Filter] list.
• The set value when pressing the [>> add] button is applied to each filter parameter.
• It is possible to set the same item repeatedly.
• In the case of the [Standard data] to which “Filter Correction” is applied, the applied
filtering conditions are displayed in the [Order/Filter] list.
• When “Filter Correction” is not applied to [Standard data] and the filtering order is
set by selecting [Recipe Setting]
– [Measurement Condition (4/4)], the filtering
conditions set by “Recipe” are displayed in the [Order/Filter] list.
Memo