49
10. CONNECTING TO EXTERNAL DEVICES
1. Power OFF the OS. Connect the OS and
computer using the USB cable.
• The computer does not need to be turned OFF
before connection.
2. Press {
} while pressing
{ENT}
to display a
message box asking whether to boot USB mode,
then press
[YES]
.
The screen of the instrument will be <USB Mode>.
• OS may not be displayed as <Removable Disk>.
It depends on Windows settings.
Follow the instructions below to ensure that the
OS continues to operate normally during USB
transfer.
• Do not change the folder hierarchy or folder
names in <Removable Disk>.
• Do not format the "removable disk" on the
computer.
3. Perform "Safely Remove Hardware"
in the
task bar and disconnect the USB cable.
4. Press
{
}
and hold (about 1sec) to turn off the
instrument to exit USB mode connection.
Mobile mode connection
A synchronous software needs to be installed to the computer depending on the Windows
version.
1. Power OFF the OS. Connect the OS and
computer using the USB cable.
• The computer does not need to be turned OFF
before connection.
Computer to connect
Synchronous software
Windows XP
ActiveSync
Windows vista/7
Windows Mobile Device Center
