Topcon Motorgrader, Operator'S Manual

Page: 67 / 172

Blade Wear Calibration (Trim)
P/N 7010-0344
3-9
3. If the cutting edge matches, no adjustment is needed. Press the
"ENTER" button. If the cutting edge does not match, turn the
right grade adjustment knob to get it to match. Press the
"ENTER" button, and the Blade Trim Calibration is complete.
Figure 3-11.
NOTICE
NOTICE
After pushing the "ENTER" button, the cutting edge and will
raise or lower half the distance you just dialed in to get it to
match.
System System
Five Five
System
Five
A uto A uto
System System
Five Five
System
Five
CONTROL MODE
GAINS /
+
/
—
/ TRIM MENU
0.0% 0.17
F
T
-
SET
BLADE WEAR CAL.
ENTER EXIT
TURN THE GRADE
KNOB TO GET THE
BLADE TO MATCH
2.0%